QINGLONG QL-EXTERIOR WALL TRANSPARENT WATERPROOF COATING FOR OUTDOOR WALL WATERPROOFING
MYR69.00
Out of stock
SKU
1L QL-Ext Wall Trans Waterproof
- Colorless And Transparent, It Will Not Ruin The Original Decorative Effect After Coating; Not Easy To Turn Yellow Or Be Stained With Dust;
- Excellent Resistance To Heat, Ultraviolet Rays, Ozone, Acid And Alkali; Great Adaptation To Temperature
- Excellent Film Formation, Soft And Tough
- Using Water As A Dispersion Medium; Non-toxic, Harmless, Non-polluting, It Is An Environmental-friendly Product
- Supporting Cold Application, It Is Easy To Use And Can Be Applied By Brushing, Rolling, Spraying, Scraping To The Walls, The Film-forming Has Microporous Permeability, Which Is Suitable For Thermal Evaporation In A Humid Climate In The South, And Won’t Be Agitated
- Low Dosage And Low Cost.
Features:-
- Brand: QINGLONG
- Exterior Wall Transparent Waterproof Coating
- For Outdoor Wall Waterproofing
- Transparent Coating
- Colourless Polymer Product
Special Features:-
Application Range:-
1. Suitable For Waterproofing Repair Of Exterior Wall Leakage Of Various Buildings;
2. Suitable For Waterproofing Applied To The Interface Of Various Decorative Coating Materials;
3. Waterproof And Moisture-proof On The Surface Of Exterior Wall Decorative Materials.
Application Method:-
1. Use Detergent, Wire Brush And Cloth To Clean The Base Of The Wall As Much As Possible, But Try Not To Destroy The Original Surface Luster;
2. Paint The Transparent Waterproof Coating On The Wall With A Brush. The Joints Of Decorative Tiles Should Be Carefully Brushed, About 2-3 Times In General. When Brushing, Apply A New Coating On Top The Other When The Previous Layer No Longing Stick To Hands, And The Direction Of Brushing Should Be Crisscross-cutting.
3. In The Construction Process, If The Viscosity Is Too High, Water Can Be Added, But The Amount Of Water Should Be As Little As Possible;
4. Reference Consumption:0.1 ~ 0.2mm Thick (0.1~0.2kg/m²)
- Colorless And Transparent, It Will Not Ruin The Original Decorative Effect After Coating; Not Easy To Turn Yellow Or Be Stained With Dust
- Excellent Resistance To Heat, Ultraviolet Rays, Ozone, Acid And Alkali; Great Adaptation To Temperature
- Excellent Film Formation, Soft And Tough
- Using Water As A Dispersion Medium; Non-toxic, Harmless, Non-polluting, It Is An Environmental-friendly Product
- Supporting Cold Application, It Is Easy To Use And Can Be Applied By Brushing, Rolling, Spraying, Scraping To The Walls, The Film-forming Has Microporous Permeability, Which Is Suitable For Thermal Evaporation In A Humid Climate In The South, And Won’t Be Agitated
- Low Dosage And Low Cost.
Application Range:-
1. Suitable For Waterproofing Repair Of Exterior Wall Leakage Of Various Buildings;
2. Suitable For Waterproofing Applied To The Interface Of Various Decorative Coating Materials;
3. Waterproof And Moisture-proof On The Surface Of Exterior Wall Decorative Materials.
Application Method:-
1. Use Detergent, Wire Brush And Cloth To Clean The Base Of The Wall As Much As Possible, But Try Not To Destroy The Original Surface Luster;
2. Paint The Transparent Waterproof Coating On The Wall With A Brush. The Joints Of Decorative Tiles Should Be Carefully Brushed, About 2-3 Times In General. When Brushing, Apply A New Coating On Top The Other When The Previous Layer No Longing Stick To Hands, And The Direction Of Brushing Should Be Crisscross-cutting.
3. In The Construction Process, If The Viscosity Is Too High, Water Can Be Added, But The Amount Of Water Should Be As Little As Possible;
4. Reference Consumption:0.1 ~ 0.2mm Thick (0.1~0.2kg/m²)