Hardex RS-625 Grey RTV Silicone Gasket Maker High-Temperature

- sensor save

- excellent oil resistant

- low volatiles

- low-odour

- hi-temp resistant 625'f intermittent

- non corrosive

Features : -

A non-corrosive, low odor and sensor safe gasket maker.

It features excellent oil, cooling and shop fluids resistance.

Specially formulated for high torque application which requires a unique RTV silicone gasket maker.

It remains flexible and stable at temperatures ranging from -80ºF to 625ºF (62ºC - 329ºC) intermittent.

Exceeds manufacturers' performance requirements.

Recommended Applications: Intake manifold end seal, valve covers, timing covers, water pumps, thermostat housings and others.

Directions :

1. Surface must be clean , dry and oil free .

2. Pierce seal at the end of the metal tube with reverse end of cap

3. Screw on nozzle and cut to desired bead size

4. Apply even bead ( 1/16 '' - 1/ 8 '' )

5. Assemble part once silicone skinned ( - 15 min )

6. Remove excess silicone . Do not squeeze silicone by over - tighten bolt

7. Clean nozzle , replace cap after use