1.0kg PENTENS Dr.Wall Anti-Fungal Compound Coating
- As efflorescence prevention
- Can be used as moisture barrier for structural
- As sanwish layer to waterproofing / paint material
- Paintnable after dry
- 1kg per tin
PENTENS DR. WALL is a rich combination of organic and inorganic chemical composition plus specific modification of quartz sand, cement and concrete. A special formula design for the construction surface layer (paint layer). PENTENS DR. WALL can be used in concrete or cement catalytic substrate. It effectively suppresses the efflorescence.
Operation Method
1. Remediate construction surface, remove debris from the structure completely. The debris includes the paint layer, paint, loose cement, weathered material, salt, oil, followed by key efflorescence, which needed to be cleared away. The application area need to be the size double of the efflorescence in order to get the best result.
2. Before the powder being apply, water-based primer need to be apply to increase the adhesion. (Recommend to double the area size of what needed to be cure to achieve the best results).
3. Take a certain percentage of the water into a clean empty bucket, slowly mix with the PENTENS DR.WALL, (recommended proportion 1 litre water: 3 litre powder), brush, wipe, push knives etc. can be used for the operation.
4. After dry it for more than 8 hours, 1-3 days observation needed to determine whether more operation needed. After that apply to soil painting.
Dosage
Amount of about 1kg/m2, 1 gallon about one floor, this is a coating weight. (Subject to the construction surface may be)
Color: White
Powder: Mix with water
NOTE: If the wall has serious water seepage (position side) need to solve with waterproofing in prior.
